Versatile Vent Air Filter Canister

Bay Products' VENT-A-SORB is designed to treat nuisance gases from venting applications. The VENT-A-SORB has a treatment capacity of up to 20 cubic feet per minute (cfm) of continuous service.

The VENT-A-SORB can handle a variety of air contaminants such as:

• Hydrogen Sulfide
• Mercaptans
• Volatile Organic Compounds (VOCs)
• Other nuisance or odorous compounds

The VENT-A-SORB can be used for a variety of applications where low flows of gases are being discharged and containment of these gases is required or desirable.

Install by mounting the VENT-A-SORB in a suitable location. It can be mounted vertically, horizontally, or at an angle. Attach a vent line from the source to the VENT-A-SORB 1" or 2" PVC union. Remove the protective tape and allow air to flow through the VENT-A-SORB.

After the media is saturated, remove it from service, seal off both ends and dispose it according to local regulations.

The VENT-A-SORB is 14" long x 6 ½" diameter and is made of long life schedule 40 PVC. It contains approximately 8 pounds of high capacity media. The useful life in most applications is well over two to three years.

Please specify media type and connection size when ordering.

Note: Consult Bay Products on expected bed life for your application. Dispose of spent system according to local regulations.