Bay Products VENT-A-SORB is designed to treat nuisance gases from venting applications. The VENT-A-SORB has a treatment capacity of up to 20 cubic feet per minute (cfm) of continuous service.
The VENT-A-SORB can handle a variety of air contaminants such as:
- Hydrogen Sulfide
- Mercaptans
- Volatile Organic Compounds (VOCs)
- Other nuisance or odorous compounds
The VENT-A-SORB can be used for a variety of applications were low flows of gases are being discharged and containment of these gases are required or desirable.
Install by mounting the VENT-A-SORB in a suitable location. It can be mounted vertically, horizontally, or at an angle. Attach a vent line from the source to the VENT-A-SORB 1” or 2” PVC union. Remove the protective tape and allow air to flow through the VENT-A-SORB.
The VENT-A-SORB can be used for a variety of applications were low flows of gases are being discharged and containment of these gases are required or desirable.
Install by mounting the VENT-A-SORB in a suitable location. It can be mounted vertically, horizontally, or at an angle. Attach a vent line from the source to the VENT-A-SORB 1” or 2” PVC union. Remove the protective tape and allow air to flow through the VENT-A-SORB. |
